Lexmark X925 7541-03 series, Service Manual

Page: 491 / 500

Index
I-5
1234 xxx
it should not
2-60
service checks
2-45
111.01 Black printhead error
2-45
112.01 Cyan printhead error Error
2-45
113.01 Magenta printhead error
2-45
121.05 Fuser - fuser heater error
2-48
126.xx Power switch error
2-48
130.xx High voltage power supply error
2-49
132.00 Density sensor error
2-49
132.xx Abnormal theta sensor
2-50
136.xx Temperature humidity sensor error
2-50
140 Drive motor Error
2-51
146.01 Tray1error
2-52
146.03 Tray3error
2-52
146.04 Tray4 error
2-53
146.05 Tray5 error
2-54
149.01 Fuser / paper exit motor Error
2-51
171.01 Fuser fan error
2-54
172.01 - Power supply unit fan error
2-55
173.01 - Main unit fan error
2-55
174.01 Rear fan error
2-55
54 Network Software error
2-95
900.xx System software
2-63
941.01 SDRAM R/W error
2-66
941.03 CPU error
2-66
941.04 MDC controller error
2-67
941.05 EEPROM error
2-67
950.00–950.29-EPROM mismatch
2-68
ADF paperfeed
2-36
ADF streaks
2-80
DRAM options
2-94
duplex
2-24
Error code 976 - Network card x
2-95
false door open
2-90
Fax dials a number, but no connection is made
2-87
Fax reception fails
2-84
Faxes fail to transmit
2-82
flash options
2-94
hard disk options
2-95
imaging unit missing
2-93
Incoming fax has blank spaces or poor quality
2-87
insert tray
2-92
Network card option
2-95
networking
2-88
No dial tone
2-87
ON / OFF switch automatically switching to the Off
position
2-48
operator panel
2-91
option card
2-90
,
2-94
Paper has entered the duplex unit (Paper jam 230, 231-
9)
2-26
Paper has entered the fuser and exited the printer
(Paper jam 203)
2-25
Paper has exited the registration roller and entered the
fuser (Paper jam 201)
2-25
Paper has stopped at the registration roller or has not
reached the fuser (Paper jams 200, 250, 24x)
2-25
Paper in ADF size service check
2-100
Paper is being picked up and carried to the registration
roller (Paper jams 200, 250, 24x).
2-24
paper path
2-24
Paper has entered the duplex unit (Paper jam 230,
231-9)
2-26
Paper has entered the fuser and exited the printer
(Paper jam 203)
2-25
Paper has exited the registration roller and entered
the fuser (Paper jam 201)
2-25
Paper has stopped at the registration roller or has
not reached the fuser (Paper jams 200, 250,
24x)
2-25
Paper is being picked up and carried to the registra-
tion roller (Paper jams 200, 250, 24x).
2-24
paper skew
2-93
Power supply (Dead machine) service check
2-96
printhead service check
2-97
scanner, fax, copy
ADF cover open
2-81
ADF paper am
2-36
escalating a fax issue to second-level support
2-86
serial port
2-94
transfer belt up down check
2-97
unable to print from USB thumb drive
2-98
USB port
2-90
waste toner bottle missing
2-98
Words on fax are stretched
2-87
wrong paper size service check - tray1
2-99
Wrong paper size service check - tray2
2-99
service error
111.01 - black printhead error
2-45
112.01 - cyan printhead error
2-45
113.01 - magenta printhead error
2-45
114.01 - yellow printhead error
2-45
121.01 - thermistor 1 error
2-46
121.02 - thermistor 2 error
2-46
121.03 - thermistor 3 error
2-47
121.04 Belt thermistor error
2-47
121.05 - fuser - fuser heater error
2-48
126.xx - power switch error
2-48
130.xx -high voltage power supply error
2-49
132.xx - density sensor error
2-49
132.xx abnormal theta sensor
2-50
136.xx - temperature humidity sensor error
2-50
140.01 - main motor error
2-51
146.01 - tray 1 error
2-52
149.01 - exit motor error
2-51
171.01 - fuser fan error
2-54
172.01 - power supply unit fan error
2-55
173.01 - main unit fan error
2-55
174.01 - rear fan error
2-55
840.03 service check
2-56
841.00 Invalid configuration or ASIC not found
2-56
841.01 Invalid AFE setting
2-56
841.02 Delayed interrupt detected
2-57
841.03 Failed indirect register test
2-57
841.04 Failed external DRAM test
2-57
841.05 Image pipe time-out
2-57
841.06 Scanner did not initiate scan
2-58
842.00 No response / 842.01 HW protocol / 842.02