Lenovo RackSwitch G8332, Command Reference Manual

Page: 747 / 776

© Copyright Lenovo 2016 Appendix A: Enterprise NOS System Log Messages
747
NTP System clock updated
nsx ‐ gw Disabling NWV mode is in process.....wait.....
nsx ‐ gw Disabling NWV mode is complete.
OSPF Neighbor Router ID <router ID> , Neighbor State {Down
|
Loopback
|
Waiting
|
P To P
|
DR
|
BackupDR
|
DR Other
|
Attempt
|
Init
|
2 Way
|
ExStart
|
Exchange
|
Loading
|
Full}
SERVER link {down
|
up} on port <port>
SSH (remote disconnect msg)
SSH <username> ( <user type> ) {logout
|
ejected
|
idle timeout
|
connection
closed} from {Console
|
Telnet/SSH}
SSH <username> ( <user type> ) login {on Console
|
from host <IP address> }
SSH Error in setting the new config
SSH Failed login attempt via SSH
SSH New config set
SSH scp <username> ( <user type> ) {logout
|
ejected
|
idle timeout
|
connection closed} from {Console
|
Telnet/SSH}
SSH scp <username> ( <user type> ) login {on Console
|
from host
<IP address> }
SSH Wrong config file type
SYSTEM Change fibre GIG port <port> mode to full duplex
SYSTEM Change fibre GIG port <port> speed to 1000
SYSTEM Changed ARP entry for IP <IP address> to: MAC <MAC address>,
Port <port> , VLAN <VLAN>
SYSTEM Enable auto negotiation for copper GIG port: <port>
SYSTEM I2C device <ID> <description> set to access state <state> [from CLI]
SYSTEM Port <port> disabled
SYSTEM Port <port> disabled due to reason code <reason code>
Thread LOG_NOTICE Message (continued)