Lenovo RackSwitch G8332, Command Reference Manual

Page: 639 / 776

© Copyright Lenovo 2016 Chapter 4: Configuration Commands
639
VM Group Configuration
The following table describes the VM group configuration options. A VM group is
a collection of members, such as VMs, ports or Link Aggregation Groups (LAGs).
Members of a VM group share certain properties, including VLAN membership,
ACLs (VMAP), and VM profiles.
Table 365.
VM Group Configuration Options
Command Syntax and Usage
[no] virt vmgroup
<1 ‐ 4096>
cpu
Enables or disables sending unregistered IPMC traffic to the CPU.
Command mode: Global configuration
[no] virt vmgroup
<1 ‐ 4096>
flood
Enables or disables the flooding of unregistered IPMC traffic.
Command mode: Global configuration
[no] virt vmgroup
<1 ‐ 4096>
key
<1 ‐ 65535>
Adds or removes an LACP admin key to/from the VM group. LACP LAGs
formed with this admin key will be included in the VM group.
Command mode: Global configuration
[no] virt vmgroup
<1 ‐ 4096>
optflood
Enables or disables Optimized Flooding on the VM group.
Command mode: Global configuration
[no] virt vmgroup
<1 ‐ 4096>
port
<port alias or number>
Adds or removes the selected port to/from the VM group.
Note : A port can be added to a VM group only if no VMs on that port are
members of the VM group.
Command mode: Global configuration
[no] virt vmgroup
<1 ‐ 4096>
portchannel
<1 ‐ 104>
Adds or removes the selected LAG to/from the VM group.
Command mode: Global configuration
virt vmgroup
<1 ‐ 4096>
profile
<profile name (1 ‐ 39 characters)>
Adds the selected VM profile to the VM group.
Note: This command can only be used if the VM group is empty (that is, it only
has a profile assigned).
Command mode: Global configuration
no virt vmgroup
<1 ‐ 4096>
profile
Removes the VM profile assigned to the VM group.
Note: This command can only be used if the VM group is empty (only has the
profile assigned).
Command mode: Global configuration