Lenovo RackSwitch G8332, Command Reference Manual

Page: 448 / 776

448
G8332 Command Reference for ENOS 8.4
802.1X Global Configuration
The global 802.1X commands allow you to configure parameters that affect all
ports in the switch.
Table 220.
802.1X Global Configuration Options
Command Syntax and Usage
dot1x max ­ request
<1 ‐ 10>
Sets the maximum number of times the authenticator retransmits an
EAP ‐ Request packet to the supplicant (client).
The default value is
2
.
Command mode: Global configuration
dot1x mode {force ­ unauthorized|auto|force ­ authorized}
Sets the type of access control for all ports:

force ­ unauthorized
‐ the port is unauthorized unconditionally.

auto
‐ the port is unauthorized until it is successfully authorized by the
RADIUS server.

force ­ authorized
‐ the port is authorized unconditionally, allowing all
traffic.
The default value is
force ­ authorized
.
Command mode: Global configuration
dot1x quiet ­ time
<0 ‐ 65535>
Sets the time, in seconds, the authenticator waits before transmitting an
EAP ‐ Request/ Identity frame to the supplicant (client) after an authentication
failure in the previous round of authentication.
The default value is
60
seconds.
Command mode: Global configuration
[no] dot1x re ­ authenticate
Sets the re ‐ authentication status to
on
or
off
.
The default value is
off
.
Command mode: Global configuration
dot1x re ­ authentication ­ interval
<1 ‐ 604800>
Sets the time, in seconds, the authenticator waits before re ‐ authenticating a
supplicant (client) when periodic re ‐ authentication is enabled.
The default value is
3600
seconds.
Command mode: Global configuration