Lenovo RackSwitch G8332, Command Reference Manual

Page: 610 / 776

610
G8332 Command Reference for ENOS 8.4
RP Candidate Configuration
Use these commands to configure a PIM router Rendezvous Point (RP) candidate.
RP Static Configuration
Use these commands to configure a static PIM router Rendezvous Point (RP).
Table 337.
RP Candidate Configuration Options
Command Syntax and Usage
rp ­ candidate holdtime
<0 ‐ 255>
Configures the hold time of the RP candidate, in seconds.
Command mode : PIM Component
no rp ­ candidate holdtime
Resets the hold time of the RP candidate to its default value of
0
seconds.
Command mode: PIM Component
[no] rp ­ candidate rp ­ address
<group multicast address>
<group subnet mask> <IP address>
Adds or removes an RP candidate.
Command mode : PIM Component
Table 338.
RP Static Configuration Options
Command Syntax and Usage
rp ­ static rp ­ address
<group multicast address> <group subnet mask>
<IP address>
Adds a static RP.
Command mode : PIM Component
no rp ­ static rp ­ address
<group multicast address> <group subnet mask>
Removes the specified static RP.
Command mode : PIM Component