Lenovo RackSwitch G8332, Command Reference Manual

Page: 51 / 776

© Copyright Lenovo 2016 Chapter 2: Information Commands
51
Layer 2 Information
The following commands display Layer 2 information:
Table 19.
Layer 2 Information Commands
Command Syntax and Usage
show dot1x information
Displays 802.1X Information. For details, see page 54 .
Command mode: All
show failover trigger
<1 ‐ 8>
information
Displays Layer 2 Failover information. For details, see page 61 .
Command mode: All
show hotlinks information
Displays Hot Links information. For details, see page 63 .
Command mode: All
show layer2 information
Dumps all Layer 2 switch information available (10K lines or more, depending
on your configuration).
If you want to capture dump data to a file, set your communication software
on your workstation to capture session data prior to issuing the dump
commands.
Command mode: All
show lldp information
Displays Link Layer Discovery Protocol (LLDP) information. For details, see
page 64 .
Command mode: All
show portchannel information
Displays the state of each port in the various Link Aggregation Groups
(LAGs). For details, see page 80 .
Command mode: All