Lenovo RackSwitch G8332, Command Reference Manual

Page: 486 / 776

486
G8332 Command Reference for ENOS 8.4
Layer 2 Failover Configuration
Use these commands to configure Layer 2 Failover. For more information about
Layer 2 Failover, see “High Availability” in the Lenovo RackSwitch G8332 Application
Guide for Lenovo Enterprise Network Operating System 8.4 .
Failover Trigger Configuration
The following table describes the Failover Trigger commands.
Table 245.
Layer 2 Failover Configuration Options
Command Syntax and Usage
[no] failover enable
Globally enables or disables Layer 2 Failover.
Command mode: Global configuration
show failover trigger
Displays current Layer 2 Failover parameters.
Command mode: All
Table 246.
Failover Trigger Configuration Options
Command Syntax and Usage
[no] failover trigger
<1 ‐ 8>
enable
Enables or disables the Failover trigger.
Command mode: Global configuration
failover trigger
<1 ‐ 8>
limit
<0 ‐ 1024>
Configures the minimum number of operational links allowed within each
trigger before the trigger initiates a failover event. If you enter a value of zero
(0), the switch triggers a failover event only when no links in the trigger are
operational.
Command mode: Global configuration
no failover trigger
<1 ‐ 8>
Deletes the Failover trigger.
Command mode: Global configuration
show failover trigger
<1 ‐ 8>
Displays the current failover trigger settings.
Command mode: All