Lenovo RackSwitch G8332, Command Reference Manual

Page: 555 / 776

© Copyright Lenovo 2016 Chapter 4: Configuration Commands
555
OSPFv3 Redistribute Entry Configuration
The following table describes the OSPFv3 Redistribute Entry commands.
Table 294.
OSPFv3 Redist Entry Configuration Options
Command Syntax and Usage
redist ­ config
<1 ‐ 128>
address
<IPv6 address> <IPv6 prefix length (1 ‐ 128)>
Configures the base IPv6 address and the subnet prefix length for the
redistribution entry.
Command mode : Router OSPF3
[no] redist ­ config
<1 ‐ 128>
enable
Enables or disables the OSPFv3 redistribution entry.
Command mode : Router OSPF3
redist ­ config
<1 ‐ 128>
metric ­ type {asExttype1|asExttype2}
Configures the metric type applied to the route before it is advertised into the
OSPFv3 domain.
Command mode : Router OSPF3
redist ­ config
<1 ‐ 128>
metric ­ value
<1 ‐ 16777215>
Configures the route metric value applied to the route before it is advertised
into the OSPFv3 domain.
Command mode : Router OSPF3
redist ­ config
<1 ‐ 128>
tag
<0 ‐ 4294967295>
Configures the route tag.
Command mode : Router OSPF3
no redist ­ config
<1 ‐ 128>
tag
Removes the route tag.
Command mode: Router OSPF3
no redist ­ config
<1 ‐ 128>
Deletes the OSPFv3 redistribution entry.
Command mode : Router OSPF3
show ipv6 ospf redist ­ config
<1 ‐ 128>
Displays the current OSPFv3 redistribution configuration for the specified
entry.
Command mode : All