Lenovo RackSwitch G8332, Command Reference Manual

Page: 638 / 776

638
G8332 Command Reference for ENOS 8.4
virt vmpolicy vmbwidth {
<MAC address>
|
<UUID>
|
<name>
|
|
<IP address>
|
<index number>
} txrate
<0 ‐ 40000000>
<max. burst (0 ‐ 4096)>
[
<ACL number>
]
The first value configures Committed Rate—the amount of bandwidth
available to traffic transmitted from the VM to the switch, in kilobits per
second. Enter the value in multiples of 64.
The second values configures the maximum burst size, in kilobits. Enter one of
the following values:
0
,
32
,
64
,
128
,
256
,
512
,
1024
,
2048
or
4096
.
The third value represents the ACL assigned to the transmission rate. The ACL
is added automatically, in sequential order, if not specified by the user. If there
are no available ACLs, the TXrate cannot be configured. Each TXrate
configuration reduces the number of available ACLs by one.
Command mode: Global configuration
no virt vmpolicy vmbwidth {
<MAC address>
|
<UUID>
|
<name>
|
|
<IP address>
|
<index number>
}
Deletes the bandwidth management settings from this VM policy.
Command mode: Global configuration
show virt vmpolicy vmbwidth [
<MAC address>
|
<UUID>
|
<name>
|
|
<IP address>
|
<index number>
|
<index range>
] [|{include|exclude|
|section|begin}]
Displays the current VM bandwidth management parameters for all virtual
machines or only for a certain VM by specifying its MAC address, UUID,
name, IP address or index number.

|
displays the VM bandwidth management parameters matching one of the
following filters:
•
include
displays parameters matching the specified expression
•
exclude
displays parameters not matching the specified expression
•
section
displays parameters matching the specified section
•
begin
displays parameters beginning from the first parameter that
matches the specified expression
Command mode: All
Table 364.
VM Bandwidth Management Options (continued)
Command Syntax and Usage