Lenovo RackSwitch G8332, Command Reference Manual

Page: 449 / 776

© Copyright Lenovo 2016 Chapter 4: Configuration Commands
449
dot1x server ­ timeout
<1 ‐ 65535>
Sets the time, in seconds, the authenticator waits for a response from the
RADIUS server before declaring an authentication timeout.
The default value is
30
seconds.
The time interval between transmissions of the RADIUS Access ‐ Request
packet containing the supplicant’s (client’s) EAP ‐ Response packet is
determined by the current setting of
radius ­ server timeout
<1 ‐ 10>
(default is
3
seconds).
Command mode: Global configuration
dot1x supplicant ­ timeout
<1 ‐ 65535>
Sets the time, in seconds, the authenticator waits for an EAP ‐ Response packet
from the supplicant (client) before retransmitting the EAP ‐ Request packet
from the authentication server.
The default value is
30
seconds.
Command mode: Global configuration
dot1x transmit ­ interval
<1 ‐ 65535>
Sets the time, in seconds, the authenticator waits for an EAP ‐ Response/Identity
frame from the supplicant (client) before retransmitting an
EAP ‐ Request/Identity frame.
The default value is
30
seconds.
Command mode: Global configuration
[no] dot1x vlan ­ assign
Sets the dynamic VLAN assignment status to
on
or
off
.
The default value is
off
.
Command mode: Global configuration
default dot1x
Resets the global 802.1X parameters to their default values.
Command mode: Global configuration
show dot1x
Displays current global 802.1X parameters.
Command mode: All
Table 220.
802.1X Global Configuration Options (continued)
Command Syntax and Usage