Lenovo RackSwitch G8332, Command Reference Manual

Page: 591 / 776

© Copyright Lenovo 2016 Chapter 4: Configuration Commands
591
out ­ ah spi
<256 ‐ 4294967295>
Sets the outbound Authentication Header (AH) Security Parameter Index
(SPI).
Note : For manual policies, when peering with a third ‐ party device, key
lengths are fixed to 20 characters for SHA1.
Command mode: IPsec manual policy
out ­ esp {auth ­ key|cipher ­ key}
<key code (hexadecimal)>
Sets the outbound Encapsulating Security Payload (ESP) authenticator key or
cipher key.
Note : For manual policies, when peering with a third ‐ party device, key
lengths are fixed to 8 characters for DES and to 24 characters for 3DES and
AES ‐ CBC encryption.
Command mode: IPsec manual policy
out ­ esp spi
<256 ‐ 4294967295>
Sets the outbound Encapsulating Security Payload (ESP) Security Parameter
Index (SPI).
Note : For manual policies, when peering with a third ‐ party device, key
lengths are fixed to 20 characters for SHA1.
Command mode: IPsec manual policy
peer
<IPv6 address>
Sets the remote peer IP address.
Command mode: IPsec manual policy
traffic ­ selector
<1 ‐ 10>
Sets the traffic selector for the IPsec policy.
Command mode: IPsec manual policy
transform ­ set
<1 ‐ 10>
Sets the transform set for the IPsec policy.
Command mode: IPsec manual policy
show ipsec manual ­ policy
<1 ‐ 10>
Displays the current IPsec manual policy settings.
Command mode: All
Table 323.
IPsec Manual Policy Options (continued)
Command Syntax and Usage