Lenovo RackSwitch G8332, Command Reference Manual

Page: 25 / 776

© Copyright Lenovo 2016 Chapter 1: ISCLI Basics
25
OpenFlow Instance
RS G8332(config ­ openflow ­
instance)#
Enter OpenFlow Instance Configuration mode, from Global
Configuration mode:
openflow instance
<1 ‐ 2>
Exit to Global Configuration mode:
exit
Exit to Privileged EXEC mode:
end
VSI Database
RS G8332(conf ­ vsidb)#
Enter Virtual Station Interface Database Configuration mode,
from Global Configuration mode:
virt evb vsidb
<VSIDB number>
Exit to Global Configuration mode:
exit
Exit to Privileged EXEC mode:
end
EVB Profile
RS G8332(conf ­ evbprof)#
Enter Edge Virtual Bridging VSI Type Profile Configuration
mode, from Global Configuration mode:
virt evb profile
<1 ‐ 16>
Exit to Global Configuration mode:
exit
Exit to Privileged EXEC mode:
end
VXLAN Gateway
RS G8332(conf ­ nsx ­ gw)#
Enter VXLAN Gateway Configuration mode, from Global
Configuration mode:
nwv nsx ­ gw
Exit to Global Configuration mode:
exit
Exit to Privileged EXEC mode:
exit
FC Zone Configuration
RS G8332(config ­ zone)#
Enter Fibre Channel Zone Configuration mode, from Global
Configuration mode:
zone name
<1 ‐ 64 characters>
vlan
<VLAN ID (2 ‐ 4094)>
Exit to Global Configuration mode:
exit
Exit to Privileged EXEC mode:
end
FC Zoneset Configuration
RS G8332(config ­ zoneset)#
Enter Fibre Channel Zoneset Configuration mode, from Global
Configuration mode:
zoneset name
<1 ‐ 64 characters>
vlan
<VLAN ID (2 ‐ 4094)>
Exit to Global Configuration mode:
exit
Exit to Privileged EXEC mode:
end
FC Alias Configuration
RS G8332(config ­ fcalias)#
Enter Fibre Channel FC Alias Configuration mode, from Global
Configuration mode:
fcalias name
<1 ‐ 64 characters>
vlan
<VLAN ID (2 ‐ 4094)>
Exit to Global Configuration mode:
exit
Exit to Privileged EXEC mode:
end
Table 2. ISCLI Command Modes (continued)
Command Mode/Prompt Command used to enter or exit