Lenovo RackSwitch G8332, Command Reference Manual

Page: 343 / 776

© Copyright Lenovo 2016 Chapter 4: Configuration Commands
343
System Error Disable and Recovery Configuration
The Error Disable and Recovery feature allows the switch to automatically disable
a port if an error condition is detected on the port. The port remains in the
error ‐ disabled state until it is re ‐ enabled manually or re ‐ enabled automatically by
the switch after a timeout period has elapsed. The error ‐ disabled state of a port
does not persist across a system reboot.
Table 147.
Error Disable Configuration Options
Command Syntax and Usage
[no] errdisable recovery
Globally enables or disables automatic error ‐ recovery for error ‐ disabled ports.
The default setting is
disabled
.
Note : Each port must have error ‐ recovery enabled to participate in automatic
error recovery.
Command mode: Global configuration
errdisable timeout
<30 ‐ 86400>
Configures the error ‐ recovery timeout, in seconds. After the timer expires, the
switch attempts to re ‐ enable the port.
The default value is
300
seconds.
Note : When you change the timeout value, all current error ‐ recovery timers
are reset.
Command mode: Global configuration
show errdisable
Displays the current system Error Disable configuration. For more command
options, see page 37 .
Command mode: All