Lenovo RackSwitch G8332, Command Reference Manual

Page: 658 / 776

658
G8332 Command Reference for ENOS 8.4
no max ­ flow ­ mpls ­ push
Sets the instance’s maximum number of MPLS label push flows to the default
value of
0
(dynamic allocation).
Note : Supported only in OpenFlow 1.3.
Command mode: OpenFlow Instance
max ­ flow ­ ucast ­ fdb
<0 ‐ 123904>
Enables or disables the maximum flow unicast FDB option, which ensures a
dedicated maximum number of FDB unicast flows available for the instance.
The total number of entries is shared between instances.
By default,
max ­ flow ­ ucast ­ fdb
is set to
0
, allowing instances to
dynamically access the available FDB unicast flow slots until depletion.
Note: Setting
max ­ flow ­ ucast ­ fdb
manually limits the number of FDB
unicast flow slots available for other instances by the corresponding value.
Command mode: OpenFlow Instance
no max ­ flow ­ ucast ­ fdb
Sets the instance’s maximum number of FDB based unicast flows to the default
value of
0
(dynamic allocation).
Command mode: OpenFlow Instance
[no] member
<port alias or number>
Enables or disables port usage by the OpenFlow instance for data traffic.
Command mode : OpenFlow Instance
[no] member portchannel
<1 ‐ 208>
Enables or disables static portchannel or LACP usage by the OpenFlow
instance for data traffic.
Note : Static portchannels and LACPs are supported only in OpenFlow 1.3.
Command mode : OpenFlow Instance
min ­ flow ­ timeout
<1 ‐ 300>
Sets the minimum number of seconds after which a flow can be cleared from
the instance’s tables.
The default value is
0
, meaning controller provided values are used instead.
Command mode : OpenFlow Instance
no min ­ flow ­ timeout
Sets the number of seconds after which a flow can be cleared from the
instance’s tables to the default value of
0
(controller provided values).
Command mode : OpenFlow Instance
Table 374.
OpenFlow Configuration Options (continued)
Command Syntax and Usage