Lenovo RackSwitch G8332, Command Reference Manual

Page: 457 / 776

© Copyright Lenovo 2016 Chapter 4: Configuration Commands
457
spanning ­ tree mst max ­ hops
<4 ‐ 60>
Configures the maximum number of bridge hops a packet may traverse before
it is dropped.
The default value is
20
hops.
Command mode: Global configuration
instance
<0 ‐ 32>
vlan
<VLAN ID (1 ‐ 4094)>
Map the specified VLANs to the Spanning Tree instance. If a VLAN does not
exist, it is not created automatically.
Note : This command becomes visible only when the spanning tree mode is
MSTP.
Command mode: MST configuration
no instance
<0 ‐ 32>
vlan {
<VLAN ID (1 ‐ 4094)>
|all}
Remove the specified VLANs or all VLANs from the Spanning Tree instance.
Command mode: MST configuration
name
<1 ‐ 32 characters>
Configures a name for the MSTP region. All devices within an MSTP region
must have the same region name.
Command mode: MST configuration
no name
Clears the name of the MSTP region.
Command mode: MST configuration
revision
<0 ‐ 65535>
Configures a revision number for the MSTP region. The revision is used as a
numerical identifier for the region. All devices within an MSTP region must
have the same revision number.
Command mode: MST configuration
no revision
Resets the revision number for the MSTP region.
Command mode: MST configuration
default spanning ­ tree mst
<0 ‐ 32>
Restores a Spanning Tree instance or range of instances to default
configuration.
Command mode: Global configuration
Table 224.
Multiple Spanning Tree Configuration Options (continued)
Command Syntax and Usage