Lenovo RackSwitch G8332, Command Reference Manual

Page: 427 / 776

© Copyright Lenovo 2016 Chapter 4: Configuration Commands
427
ACL IPv6 Configuration
These commands allow you to define filtering criteria for each IPv6 Access Control
List (ACL).
Table 203.
IPv6 ACL Options
Command Syntax and Usage
access ­ control list6
<1 ‐ 128>
action {permit|deny|
|set ­ priority
<0 ‐ 7>
}
Configures a filter action for packets that match the ACL definitions. You can
choose to permit (pass) or deny (drop) packets or set the 802.1p priority level.
Command mode: Global configuration
access ­ control list6
<1 ‐ 128>
action redirect {port
<port
number>
|portchannel
<1 ‐ 64>
}
Configures the redirection of packets that match the ACL definitions. You can
choose to redirect packets either through an ethernet port or a Link
Aggregation Group (LAG).
Command mode : Global configuration
access ­ control list6
<1 ‐ 128>
egress ­ port port
<port alias or number>
Configures the ACL to function on egress packets.
Command mode: Global configuration
no access ­ control list6
<1 ‐ 128>
egress ­ port port
Disables the ACL to function on egress packets.
Command mode: Global configuration
[no] access ­ control list6
<1 ‐ 128>
log
Enables or disables Access Control List logging.
Command mode: Global configuration
[no] access ­ control list6
<1 ‐ 128>
statistics
Enables or disables the statistics collection for the Access Control List.
Command mode: Global configuration
default access ­ control list6
<1 ‐ 128>
Resets the ACL parameters to their default values.
Command mode: Global configuration
show access ­ control list6
<1 ‐ 128>
Displays the current ACL parameters.
Command mode: All