Lenovo RackSwitch G8332, Command Reference Manual

Page: 588 / 776

588
G8332 Command Reference for ENOS 8.4
IPsec Traffic Selector Configuration
The following table describes the commands used to configure an IPsec traffic
selector.
no ipsec transform
<1 ‐ 10>
Deletes the transform set.
Command mode: Global configuration
show ipsec transform ­ set
<1 ‐ 10>
Displays the current IPsec Transform Set settings.
Command mode: All
Table 320.
IPsec Transform Set Options (continued)
Command Syntax and Usage
Table 321.
IPsec Traffic Selector Options
Command Syntax and Usage
ipsec traffic ­ selector
<1 ‐ 10>
{permit|deny}
{any|icmp [
<ICMPv6 type (0 ‐ 255)>
]|tcp} {
<IPV6 address>
|any}
Sets the traffic ‐ selector to permit or deny the specified type of traffic.
Command mode: Global configuration
no ipsec traffic ­ selector
<1 ‐ 10>
Resets the specified traffic selector to its default values.
Command mode: Global configuration
show ipsec traffic ­ selector [
<1 ‐ 10>
]
Displays IPsec traffic selector information.
Command mode: All