Lenovo RackSwitch G8332, Command Reference Manual

Page: 436 / 776

436
G8332 Command Reference for ENOS 8.4
Management ACL Configuration
These commands allow you to define filtering criteria for each management ACL
(MACL).
Note:
Management ACLs (MACLs) are not supported on the management port,
only on data ports.
MACL IPv4 Filtering Configuration
These commands allow you to define IPv4 matching criteria for an MACL.
Table 212.
MACL Configuration Options
Command Syntax and Usage
access ­ control macl
<1 ‐ 256>
action {permit|deny|
|set ­ priority
<0 ‐ 7>
}
Configures a filter action for packets that match the MACL definitions. You
can choose to permit (pass), deny (drop) packets or set the 802.1p priority level
(0 ‐ 7).
Command mode: Global configuration
[no] access ­ control macl
<1 ‐ 256>
enable
Enables or disables the management ACL.
Command mode: Global configuration
[no] access ­ control macl
<1 ‐ 256>
statistics
Enables or disables the statistics collection for the MACL.
Command mode: Global configuration
show access ­ control macl
<1 ‐ 256>
Displays the current MACL parameters.
Command mode: All
Table 213.
IP version 4 Filtering Configuration Options
Command Syntax and Usage
access ­ control macl
<1 ‐ 256>
ipv4 destination ­ ip ­ address
<IP address>
[
<IP mask>
]
Defines a destination IP address for the MACL. If defined, traffic with this
destination IP address will match this MACL.
Command mode: Global configuration
no access ­ control macl
<1 ‐ 256>
ipv4 destination ­ ip ­ address
Deletes the configured destination IP address for the specified MACL.
Command mode: Global configuration