Lenovo RackSwitch G8332, Command Reference Manual

Page: 372 / 776

372
G8332 Command Reference for ENOS 8.4
SNMPv3 Configuration
SNMP version 3 (SNMPv3) is an extensible SNMP Framework that supplements
the SNMPv2 Framework by supporting the following:
 a new SNMP message format
 security for messages
 access control
 remote configuration of SNMP parameters
For more details on the SNMPv3 architecture please refer to RFC3411 to RFC3418.
Table 156.
SNMPv3 Configuration Options
Command Syntax and Usage
snmp ­ server access
<1 ‐ 32>
This command allows you to specify access rights. The View ‐ based Access
Control Model defines a set of services that an application can use for checking
access rights of the user. You need access control when you have to process
retrieval or modification request from an SNMP entity. To view command
options, see page 376 .
Command mode: Global configuration
snmp ­ server community
<1 ‐ 16>
The community table contains objects for mapping community strings and
version ‐ independent SNMP message parameters. To view command options,
see page 378 .
Command mode: Global configuration
snmp ­ server group
<1 ‐ 17>
A group maps the user name to the access group names and their access rights
needed to access SNMP management objects. A group defines the access rights
assigned to all names that belong to a particular group. To view command
options, see page 377 .
Command mode: Global configuration
snmp ­ server notify
<1 ‐ 16>
A notification application typically monitors a system for particular events or
conditions, and generates Notification ‐ Class messages based on these events
or conditions. To view command options, see page 381 .
Command mode: Global configuration
snmp ­ server target ­ address
<1 ‐ 16>
This command allows you to configure destination information, consisting of
a transport domain and a transport address. This is also termed as transport
endpoint. The SNMP MIB provides a mechanism for performing source
address validation on incoming requests, and for selecting community strings
based on target addresses for outgoing notifications. To view command
options, see page 379 .
Command mode: Global configuration