Lenovo RackSwitch G8332, Command Reference Manual

Page: 371 / 776

© Copyright Lenovo 2016 Chapter 4: Configuration Commands
371
snmp ­ server trap ­ source {
<IP interface number>
|loopback
<1 ‐ 5>
}
Configures the source interface for SNMP traps.
To send traps through the management ports, specify interface 126.
Command mode: Global configuration
no snmp ­ server trap ­ source [loopback]
Deletes all source interfaces for SNMP traps. The
loopback
option only
removes the loopback source interfaces.
Command mode: Global configuration
snmp ­ server write ­ community
<1 ‐ 32 characters>
Configures the SNMP write community string. The write community string
controls SNMP “set” access to the switch. It can have a maximum of 32
characters.
The default write community string is private .
Command mode: Global configuration
[no] snmp ­ server write ­ community ­ additional
<1 ‐ 32 characters>
Adds or removes an additional SNMP write community string. Up to 7
additional write community strings are supported.
Command mode: Global configuration
show snmp ­ server
Displays the current SNMP configuration.
Command mode: All
Table 155.
System SNMP Options (continued)
Command Syntax and Usage