Lenovo RackSwitch G8332, Command Reference Manual

Page: 346 / 776

346
G8332 Command Reference for ENOS 8.4
logging host
<1 ‐ 2>
facility
<0 ‐ 7>
This option sets the facility level of the first or second syslog host displayed.
The default value is
0
.
Command mode: Global configuration
logging host
<1 ‐ 2>
port
<UDP port (1 ‐ 65535)>
Configure the UDP server port used by the syslog host to receive logging
messages from the switch.
Command mode : Global configuration
logging host
<1 ‐ 2>
severity
<0 ‐ 7>
This option sets the severity level of the first or second syslog host displayed.
The default value is
7
, which means log all severity levels.
Command mode: Global configuration
no logging host
<1 ‐ 2>
Deletes the specified syslog host.
Command mode: Global configuration
[no] logging log {all|
<feature>
}
Enables or disables features for which syslog messages can be generated. You
can choose to enable/disable syslog on all available features by using the
option
all
or enable/disable specific features (such as
vlans
,
stg
or
ssh
).
For a complete list of features, see page 348 .
Command mode: Global configuration
[no] logging pdrop enable
Enables or disables packet drop logging.
By default, the switch generates these messages once every
2
minutes.
Command mode: Global configuration
logging pdrop interval
<0 ‐ 30>
Configures the packet drop logging interval, in minutes.
The default value is
2
minutes.
Command mode: Global configuration
logging source ­ interface loopback
<1 ‐ 5>
Sets the loopback interface number for syslogs.
Command mode: Global configuration
no logging source ­ interface loopback
Removes the loopback interface for syslogs.
Command mode: Global configuration
Table 149.
Host Log Configuration Options (continued)
Command Syntax and Usage