7. Screen Capture Feature
7-2
7.1
Taking a Screen Capture of the Display
To take a screen capture of the display, follow the procedure below.
Figure 7-2 Taking a screen capture of the display
1. Configure the LV 5330 so that the display that you want to capture appears on the screen.
Only measurement displays can be captured. The file list display and the USB memory
display cannot be captured.
2. Press CAPTURE.
When you press CAPTURE, the LV 5330 takes a screen capture of the display. You can
also take screen captures by pressing F•1 HOLD while the screen capture menu is
displayed.
Note that if you perform one of the following operations after capturing a display, the
captured data will be cleared.
•
Change the display mode.
•
Press SYSTEM, MEMORY, or RECALL.
•
Turn off the power.
7.2
Displaying Screen Capture Data on the LV 5330
The data that you capture by following the procedure in section 7.1, “Taking a Screen Capture
of the Display,” can be displayed, or it can be overlaid on the current input signal. To display
or overlay the captured data, follow the procedure below.
Figure 7-3 Displaying screen capture data
1. Press F•2 DISPLAY, and select the display format.
The display formats that you can select are explained below.
REAL
The input signal is displayed (this is the default setting).
HOLD
The screen capture data is displayed.
BOTH
The input signal and the captured data are displayed on top of each other
with their intensities halved.
You can display the captured data of video signal waveforms, vectors, and pictures on
the LV 5330. Other kinds of data (CINELITE, CINEZONE, status, audio meter, and 5-bar)
cannot be displayed. However, these other kinds of data can be saved to USB memory
as BMP files.
For details, see section 7.3, “Saving Screen Capture Data to USB Memory.”
