11. Video Signal Waveform Display
11-7
11.5.2
Selecting the Line Display Sweep Time
To select the line display sweep time, follow the procedure below.
This setting is available when F•1 SWEEP is set to H and COLOR MATRIX is set to
COMPOSIT or when F•1 SWEEP is set to H and MODE is set to OVERLAY. When MODE
is set to PARADE, the sweep mode setting is fixed at 1H.
Reference: COLOR
MATRIX
→
Section 11.8.1, “Selecting the Display Format”
MODE
→
Section 11.12, “Switching the Display Mode”
Procedure
WFM
→
F•3 SWEEP
→
F•2 H_SWEEP
Settings
1H:
The sweep time is set to that of one line. This is the default setting.
2H:
The sweep time is set to that of two lines.
H_SWEEP = 1H
H_SWEEP = 2H
Figure 11-9 Line display sweep times
11.5.3
Selecting the Field or Frame Display Sweep Time
To select the field or frame display sweep time, follow the procedure below.
This setting is available when F•1 SWEEP is set to V and the input format is set to
interlaced or segmented frame (as long as MODE is set to PARADE and COLOR MATRIX
is set to COMPOSIT).
When the input format is progressive, the sweep time is fixed at one frame. The sweep
time is fixed at 1V unless MODE is set to PARADE and COLOR MATRIX is set to
COMPOSIT.
Reference: COLOR
MATRIX
→
Section 11.8.1, “Selecting the Display Format”
MODE
→
Section 11.12, “Switching the Display Mode”
Procedure
WFM
→
F•3 SWEEP
→
F•2 V_SWEEP
Settings
1V:
The sweep time is set to that of one field. This is the default setting.
2V:
The sweep time is set to that of one frame.
