2. Specifications
2-10
2.3.15 CINEZONE
Display
CINEZONE Display
Function
Displays the luminance levels in the picture
using different colors
Display Colors
Linear (1024 colors) or step (12 colors)
Upper Limit Setting
-6.3 to 109.4 % (values above the upper limit
are displayed using white)
Lower Limit Setting
-7.3 to 108.4 % (values below the lower limit
are displayed using black)
Level Search Display
Function
Displays a specified luminance level ±0.5 %
using green on an otherwise monochrome
picture display.
Luminance Level Setting
-7.3 to 109.4 %
2.3.16 Audio
Display
Level Meter Display
Displayed Channels
8
Meter
60 dB peak level, 90 dB peak level, or average
Peak Hold Time
0.5 to 5.0 seconds/HOLD (when displaying the
peak level)
Channels
Group Selection:
You can select any two groups from groups 1, 2,
3, and 4.
Audio Information Detection
Detects the presence of each audio channel
Sampling Frequency
48 kHz (must be synchronized to the video
signal)
2.3.17 Status
Display
SDI Signal Error Detection
Signal Detection
Detects the presence of an SDI signal
TRS Error
Detects TRS location and protection bit errors
Line Number Error
Detects HD-SDI signal line number errors
CRC Error
Detects HD-SDI signal transmission errors
EDH Error
Detects SD-SDI signal transmission errors
Gamut Error
Detects gamut errors
Detection Range Upper Limit
90.8 to 109.4 %
Detection Range Lower Limit
-7.2 to 6.1 %
Filter
Removes transient errors
(HD: 5 MHz LPF. SD: 1.8 MHz LPF)
Composite Gamut Error
Detects level errors that occur when component
signals are converted to composite signals
Detection Range Upper Limit
90.0 to 135.0 %
Detection Range Lower Limit
-40.0 to -20.0 %
Filter
Removes transient errors
(HD: 5 MHz LPF. SD: 1.8 MHz LPF)
Parity Error
Detects ancillary data header parity errors
Checksum Error
Detects ancillary data transmission errors
