9. CINELITE Display
9-6
• RGB 255 display
The RGB levels are displayed using 256 steps from 0 to 255. The levels are also indicated
using bars on the left side of the display (the order is R, G, and then B).
The value of an RGB level that is 100 % or greater is 255. The value of an RGB level that is
0 % or less is 0.
Figure 9-6 RGB 255 display
To display luminance levels as percentages or RGB levels, follow the procedure below.
Figure 9-7 Percentage and RGB display
1. Press CINELITE.
2. Press F•2 %DISPLAY.
3. Press F•3 %/RGB, and select the display format.
You can select LEVEL%, RGB%, or RGB 255.
4. Use the cursors to set the measurement point.
The measured values appear near the cursors in the format that you selected in step 3.
The cursors are not displayed if they are within the blanking interval.
Reference: Section
9.2, “Moving the Cursors”
