14. Status Display
14-26
14.6.3
Configuring Error Detection Settings
To configure error detection settings, press F•3 ERROR DETECT in the status menu. The
errors that you set to ON here are detected and displayed in the status display.
STATUS
→
F•5 ERROR CONFIG
→
F•3 ERROR DETECT
→
Figure 14-18 ERROR DETECT menu
• Detecting
TRS
Errors
To detect TRS errors, follow the procedure below. If you set this setting to ON, TRS error
information appears next to TRS in the status display.
Procedure
STATUS
→
F•5 ERROR CONFIG
→
F•3 ERROR DETECT
→
F•1 TRS ERROR
Settings
ON:
TRS errors are detected. This is the default setting.
OFF:
TRS errors are not detected.
