11. Video Signal Waveform Display
11-4
11.4.2
Setting the Variable Gain
To set the variable video signal waveform gain, follow the procedure below.
You can set the video signal waveform gain to a value between 0.2 and 10 by setting F•2
GAIN MAG and F•1 GAIN VAR.
Procedure
WFM
→
F•2 GAIN FILTER
→
F•1 GAIN VAR
Settings
CAL:
The video signal waveform gain is fixed. This is the default setting.
VAR:
You can adjust the video signal waveform gain using F•D as described below.
The gain value appears in the upper right of the screen. If you press F•D, the
gain is set to its default value of 1.000 or 5.000.
0.200 to 2.000 (when GAIN MAG is ×1)
1.000 to 10.000 (when GAIN MAG is ×5)
GAIN MAG = ×1
GAIN MAG = ×5
GAIN VAR = VAR
GAIN VAR = CAL
Figure 11-4 Video signal waveform gain
11.4.3 Selecting
a
Filter
To select a filter, follow the procedure below.
The filters that you can select vary depending on how COLOR MATRIX is set.
Reference: COLOR
MATRIX
→
Section 11.8.1, “Selecting the Display Format”
Procedure
WFM
→
F•2 GAIN FILTER
→
F•3 FILTER
