6. Presets
6-1
6. Presets
You can use the preset feature to register and load panel settings. Also, you can use the same
settings on multiple LV 5330s by copying presets to USB memory.
You cannot register date and time or Ethernet settings. Registered presets are not deleted even
if you initialize the LV 5330 by following the procedure in section 5.7.1, “Initializing the Settings
Using SETUP INIT.”
6.1 Registering
Presets
To register a preset, follow the procedure below.
Figure 6-1 Registering presets
1. Set the LV 5330 to the settings that you want to register.
2. Press MEMORY.
The file list display appears.
3. Press F•1 COMMENT INPUT.
The file name input display appears.
4. Enter a file name using up to 16 characters.
The key operations on the file name input display are as follows:
F•1 CLEAR ALL Clears all characters.
F•2 DELETE
Deletes the character above the cursor.
F•3 INSERT
Inserts a space at the cursor position.
F•4
←
Moves the cursor to the left.
F•5
→
Moves the cursor to the right.
F•6 CHAR SET Enters a character.
F•D
Turn to select a character, and press to enter the character.
