9. CINELITE Display
9-1
9. CINELITE
Display
In the CINELITE display, you can display the luminance levels of up to three points on the
picture that you have selected. To show the CINELITE display, press CINELITE.
The CINELITE display cannot be used with the multi-screen display.
CINELITE
→
Figure 9-1 CINELITE menu
You can choose one of the following luminance level display formats.
• f Stop level (f Stop display)
→
Section 9.4, “Displaying Luminance Levels as f Stop Numbers”
• Luminance level (percentage)
→
Section 9.5, “Displaying Luminance Levels as Percentages or RGB Values”
• RGB level (percentage)
→
Section 9.5, “Displaying Luminance Levels as Percentages or RGB Values”
• RGB level (256 levels)
→
Section 9.5, “Displaying Luminance Levels as Percentages or RGB Values”
9.1
Selecting the Points to Measure
You can set up to three points to measure. To select which measurement point positions you
will specify with the cursor, follow the procedure below.
The F•2 MEAS POS settings in the menus accessed by pressing F•1 f Stop DISPLAY and
F•2 %DISPLAY are the same.
Procedure
CINELITE
→
F•1 f Stop DISPLAY
→
F•2 MEAS POS
→
F•2 %DISPLAY
→
F•2 MEAS POS
Settings
P1:
You can use the cursor to select the position of measurement point 1. This is
the default setting.
P2:
You can use the cursor to select the position of measurement point 2.
P3:
You can use the cursor to select the position of measurement point 3.
