12. Vector Display
12-5
GAIN MAG = ×1
GAIN MAG = IQ-MAG
GAIN VAR = VAR
GAIN VAR = CAL
Figure 12-5 Vector gains
12.4
Line Selection Settings
To configure the line select settings, press F•3 LINE SELECT in the vector menu. You can
display the vectors of the selected line.
These settings are valid when DISPLAY is set to VECTOR or 5BAR.
Reference: DISPLAY
→
Section 12.6, “Switching between the Vector, 5 Bar, and Phase Difference
Displays”
VECTOR
→
F•3 LINE SELECT
→
Figure 12-6 LINE SELECT menu
12.4.1
Displaying the Vectors of the Selected Line
To display the vectors of the selected line, follow the procedure below.
Changing this setting will also change the picture display and video signal waveform
display line selection settings.
Procedure
VECTOR
→
F•3 LINE SELECT
→
F•1 LINE SELECT
Settings
ON:
The vectors of the selected line are displayed.
OFF:
The vectors of all lines are displayed on top of each other. This is the default
setting.
