5. System Settings
5-10
5.7 Initialization
There are two different ways to initialize the settings. One is to select SETUP INIT from the
system menu, and the other is to follow a special procedure after restarting the LV 5330. The
table below indicates which settings are initialized for each method. “Yes” means that a
setting is initialized. “No” means that a setting is not initialized.
Table 5-2 Settings That Are Initialized
Item SETUP
INIT
Restart
Ethernet settings
No
Yes
Presets
*
No
Yes
User-defined correction tables for the
CINELITE display
No Yes
Date and time
No
No
*
Includes the preset that is assigned to the SHORT CUT key.
All of the settings that are not listed in the table are initialized by both methods. For
information about the initial settings, see section 19.1, “Menu Tree.” The initial settings are
underlined.
5.7.1
Initializing the Settings Using SETUP INIT
To initialize the settings from the system menu, press F•7 SETUP INIT.
SYS
→
F•7 SETUP INIT
Figure 5-7 SETUP INIT menu
To initialize the settings, follow the procedure below. To cancel the initialization of the
settings, press F•3 INIT CANCEL.
Procedure
SYSTEM
→
F•7 SETUP INIT
→
F•1 INIT YES
5.7.2
Initializing the Settings by Restarting the LV 5330
To initialize the settings by restarting the LV 5330, follow the procedure below.
Procedure
1.
Turn off the power.
2.
Turn on the power while holding down V POS and H POS.
3.
Press WFM when the following message appears:
ERROR_SRAM FILE SYSTEM
PRESET DATA LOST!!!
PUSH [WFM] KEY
