11. Video Signal Waveform Display
11-6
11.5 Sweep
Settings
To configure the video signal waveform sweep settings, press F•3 SWEEP in the video signal
waveform menu.
WFM
→
F•3 SWEEP
→
Figure 11-7 SWEEP menu
11.5.1
Selecting the Sweep Method
To select a video signal waveform sweep method, follow the procedure below.
This setting is available when MODE is set to OVERLAY or PARADE. When MODE is set
to TIMING, the sweep mode setting is fixed at H.
Reference: MODE
→
Section 11.12, “Switching the Display Mode”
Procedure
WFM
→
F•3 SWEEP
→
F•1 SWEEP
Settings
H:
Lines are displayed. This is the default setting.
V:
Fields are displayed when the input format is interlaced or segmented frame.
Frames are displayed when the input format is progressive or when F•2
V_SWEEP is set to 2V.
SWEEP = H
H_SWEEP = V
Figure 11-8 Sweep methods
