16. Multi-Screen Display Feature
16-1
16. Multi-Screen Display Feature
The LV 5330 has eight display modes: picture, CINELITE, CINEZONE, video signal waveform,
vector, audio, status, and view finder. The display that only shows one mode at a time is
referred to as the single-screen display. The display that shows combinations of different modes
at the same time is referred to as the multi-screen display. The CINELITE, CINEZONE, and
view finder display modes cannot be incorporated into the multi-screen display.
To show the multi-screen display, press MULTI, and then press F•1 MODE to select the
combination of display modes that you want to show.
MULTI
→
Figure 16-1 Multi-screen display menu
16.1
Selecting the Multi-Screen Display Format
To select the multi-screen display format, follow the procedure below.
Procedure
MULTI
→
F•1 MODE
Settings
4SCREEN: The vector, video signal waveform, status, and picture displays appear.
You can change the status display to the AUDIO display by pressing F•7
LOWER. This is the default setting.
PIC_WFM: The picture and video signal waveform displays appear one on top of the other.
Approximately five seconds after the last operation is performed, the menu and
the information displays at the top of the screen disappear.
WFM_VEC: The video signal waveform and vector displays appear next to each other.
WFM_PIC: The video signal waveform and the picture appear.
WFM_AUD: The audio and video signal waveform displays appear next to each other.
AUDIO:
The audio display appears.
MODE = 4SCREEN
MODE = PIC_WFM
