12. Vector Display
12-10
12.6.2
Explanation of the Phase Difference Display
In the phase difference display, you can measure the phase difference between an SDI
signal and an external sync signal. To show the phase difference display, set F•6 DISPLAY
to EXTPHASE.
To configure phase difference display settings, press F•5 EXTREF PHASE.
Figure 12-12 Phase difference display
To measure phase differences, press REFE to switch to external sync mode and apply an
external sync signal to the LV 5330. The supported external sync signal formats are listed
below.
• 1080i/60,
1080i/59.94, and 1080i/50
• 1080p/30, 1080p/29.97, 1080p/25, 1080p/24, and 1080p/23.98
• 1080PsF/30, 1080PsF/29.97, 1080PsF/25, 1080PsF/24, and 1080PsF/23.98
• 720p/60, 720p/59.94, 720p/50, 720p/30, 720p/29.97, 720p/25, 720p/24, and
720p/23.98
• NTSC and NTSC with a 10-field ID
• PAL
