14. Status Display
14-29
• Detecting Composit Gamut Errors
To detect gamut errors in a pseudo-composite signal converted from the component signal,
follow the procedure below. If you set this setting to ON, composite gamut error information
appears next to COMP.GAMUT in the status display.
To set the threshold for composite gamut error detection, press F•4 ERROR LEVEL.
Procedure
STATUS
→
F•5 ERROR CONFIG
→
F•3 ERROR DETECT
→
F•6 next menu
→
F•5 C.GAMUT ERROR
Settings
ON:
Composite gamut errors are detected.
OFF:
Composite gamut errors are not detected. This is the default setting.
• Detecting BCH Errors
To detect BCH errors in the embedded audio, follow the procedure below. If you set this
setting to ON, BCH error information appears next to BCH in the status display.
This setting is valid when the input signal is HD-SDI.
Procedure
STATUS
→
F•5 ERROR CONFIG
→
F•3 ERROR DETECT
→
F•6 next menu
→
F•6 next menu
→
F•1 BCH ERROR
Settings
ON:
BCH errors are detected. This is the default setting.
OFF: BCH
errors
are not detected.
• Detecting Audio CRC Errors
To detect CRC errors in the embedded audio, follow the procedure below. If you set this
setting to ON, audio CRC error information appears next to CRC in the status display.
Procedure
STATUS
→
F•5 ERROR CONFIG
→
F•3 ERROR DETECT
→
F•6 next menu
→
F•6 next menu
→
F•3 AUDIO CRC
Settings
ON:
Audio CRC errors are detected.
OFF:
Audio CRC errors are not detected. This is the default setting.
