4. Before You Begin Measuring
4-9
4.10
Basic Menu Operations
Most of the settings are configured using the setup menu.
This section explains how to operate the setup menu, using the setup menu in the picture
display as an example.
Figure 4-13 Basic menu operations
1 Selecting a setting
To select a setting from a list like the one shown above F•3 SIZE in the figure, press F•3
repeatedly to select the setting you want. The setting changes each time you press F•3.
After you stop pressing F•3, the setting is confirmed and the pop-up menu disappears.
2 Setting a value
To set the value of a setting like F•5 CHROMA%, which is shown above, press F•5, and
then turn F•D. Generally, pressing F•D will return the value you are adjusting to its
default setting.
3 Using the control stick
Use the control stick to move the picture in the picture display or to move the cursor in
the CINELITE display. Both the picture and the cursor move in the direction that you
push the stick. To move more quickly, press down on the stick before pushing it in the
direction that you want to move.
