11. Video Signal Waveform Display
11-21
11.13 Turning
Y,C
B
,C
R
; GBR; and RGB Channels On and Off
To turn signal channels on and off, press F•5 DISPLAY in the video signal waveform menu.
The settings made here are invalid when:
• MODE is set to TIMING.
• COLOR MATRIX is set to COMPOSIT.
• YGBR or YRGB is set to ON.
Reference: MODE
→
Section 11.12, “Switching the Display Mode”
COLOR MATRIX
→
Section 11.8.1, “Selecting the Display Format”
YGBR, YRGB
→
Section 11.13, “Turning Y,C
B
,C
R
; GBR; and RGB Channels On and Off ”
WFM
→
F•7 next menu
→
F•5 DISPLAY
→
Figure 11-25 DISPLAY menu
To turn individual channels in a Y,C
B
,C
R
; GBR; or RGB signal on and off, follow the
procedure below.
You cannot set every channel to OFF.
Procedure
WFM
→
F•7 next menu
→
F•5 DISPLAY
→
F•1 CH1
F•2
CH2
F•3
CH3
Settings
ON:
The specified channel in the YC
B
C
R
, GBR, or RGB signal is displayed. This is
the default setting.
OFF:
The specified channel in the YC
B
C
R
, GBR, or RGB signal is not displayed.
The waveforms that are assigned to each channel are indicated in the table below.
Table 11-3 Waveform assignments
COLOR
MATRIX
CH1 CH2 CH3
YCbCr Y
Cb
Cr
GBR G
B
R
RGB R
G
B
