SoundAdvisor Model 831C
Setting Meter Preferences
9-6
9.4.6 Setting the External Shutoff Voltage
On your 831C, go to
Tools
System Properties
, then press the top-right
softkey (
//*
) until the
Power
tab displays.
If desired, you can customize the external shutoff voltage. When the voltage of
an external battery drops below this value, the 831C shuts off to prevent
damage to the external batteries.
LEARN MORE
The default voltage is 10.8 volts. To customize this setting, enter a value
between 10–25 volts if your battery usage is other than a standard 12V SLA
battery. For more information, see
9.5 Setting Meter Preferences
In this section:
• 9.5.1 Selecting a Microphone Correction
• 9.5.2 Enabling or Disabling AC Output
• 9.5.3 Enabling the Reset Prompt
• 9.5.4 Setting the Data Storage Location
• 9.5.5 Enabling GPS Mode
• 9.5.6 Customizing the Display Color Theme
9.5.1 Selecting a Microphone Correction
The 831C can automatically apply corrections to a measurement to account
for an environmental shroud or a specific microphone as shown in this
section.
Step 1
On your 831C, go to
Tools
3
System Properties
, then press the top-right
softkey (
//*
) until the
Preferences
tab displays.
