SoundAdvisor Model 831C
Using the Data File Manager
8-12
data file icon
displays in-line with the file name to indicate that you are
seeing a data file and not live data.
8.2.2 Using Load Settings
From a data file, you can load the measurement Setup properties used to
create the data file into the Active setup.
Before you begin:
•
Save your current Active settings to a new Setup file, if needed.
Settings in the Active setup will be lost.
•
Stop any measurement currently running or paused.
Step 1
On the 831C, go to
Tools
3
Data File Manager
.
Step 2
Highlight the desired data file, press
Menu
(
//*
), and select
Load Settings
from the pop-up menu. (No confirmation appears.)
Step 3
Close
(
/*/
) the Data Manager, go to
Tools
Setup Manager
, and select
Active
from the file list. Press the right or left softkeys (
*/*
) to examine the
Setup properties.
8.2.3 Using Create Average
Create Average
takes a saved data file and adds its average as an instance to
the unsaved Overall measurement.
•
CAUTION
: Any unsaved measurement is overwritten with the new
average instance.
•
You can add multiple files to the average. Each appears as a new
instance in the Overall measurement pages. However, each file can
only be added once.
•
A measurement can run after the averages are loaded. But this isn’t
recommended for averaging purposes.
•
After data files are averaged, you can save the new data as a single
file.
Follow these steps to create an average of your data file(s):
Step 1
Navigate to
Tools
3
Data File Manager.
