SoundAdvisor Model 831C
Instrument Hardware Overview
2-11
2.3.2 Navigating and Selecting
To navigate the display on the meter, you can press directly on the
touchscreen using the tip of your finger, or use the navigation buttons as
shown in Table 2.1.
2.3.3 Basic Run Functions
The basic run measurement functions can be executed using the buttons as
shown in Table 2.2:
Table 2.1 Buttons for Navigation
Action
Button(s)
Description
Navigate to tabs
*/*
Top left & right softkeys
Navigate to pages
82
Up & down navigation button
Navigate within display (e.g.,
move highlighted octave band)
4
6
Left & right navigation button
Access content specific menu
***
There are times when a content specific menu
appears. Press the associated top soft key to
access that menu.
Exit a menu
/*/
Press the top-middle soft key to close or save. To
exit without saving, press it, and then select
No
or
Cancel
.
Navigate up & down in a display
5
Press the
ENTER
button to move up and down on
certain pages.
Make a selection
5
Press the
ENTER
button to make a selection.
Table 2.2 Buttons for Basic Run
Action
Button(s)
Description
Initiate a run
9
Start a measurement
Pause a run
9
While the 831C is running, press this button to
pause
Stop measurement
7
End a measurement during a run or pause
Store data file
7
Pressing the stop/store button while the meter is
stopped will store the measurement data
Reset measurement
1
Press once to clear unsaved measurement data.
Press a second time to reset filters (this may take
a few seconds).
