Lamtec CMS, Manual

Page: 39 / 284

38
4 CMS Components
Fig. 4-8 AEC-TPS dimensional drawing
Item number
AEC-TPS Actuator Extension Component - DPS-Motor Type 668R0200-XX
*
* XX = dependent on the configuration
Function
Power supply
AEC-TPS
Motor outputs
24 VDC ± 20 % (via plug-in connection from MCC)
230 VAC +10/-15 %, 47 - 63 Hz, 0.5 A max
120 VAC +10/-15 %, 47 - 63 Hz, 0.5 A max
Caution! Semiconductor switching element: A minimum residual volt-
age is present even when the device is switched off.
Maximum pre-fuse 1.6 A slow-blow for each output module
Current consumption Min: 50 mA
Max: 60 mA
Power consumption 2 W
Analogue signal inputs Potentiometer 1: Potentiometer, conductive plastic 1 k Ω ... 10 k Ω
qualified according to EN 12067-2 when using a
single-channel position feedback signal
Reference voltage 6.6 V
Potentiometer 2: optional
Potentiometer, conductive plastic 1 k
Ω ... 10 k Ω
Reference voltage 6.6 V
Resolution 0.1 % from angle of rotation
Repeating precision Electronic ratio control accuracy:
– for annual check ±1.5 %
– across the entire life cycle of 10 years ±5.3 %
Running time motor to TPS module Not less than 30 s to 90°
Potentiometer connection Max. conductor length = 100 m, shielded conductor