Measurement Program
Solar Blue User Manual
175
Figure 12.8
Select protocol
When the measurement program is started (Figure 12.8), by default the
window shows one investigation protocol. More protocols can be added (see
the subsections that follow). The investigation protocol contains different
settings. The last-used protocol is the default selection. To select another
protocol, click the radio button in front of the protocol name. You can also
change the order of the protocols by clicking and dragging the name of the
protocol up/down. Protocols can be edited, copied, added, or deleted, as
described in the following subsections.
Edit an investigation protocol
Right-click the protocol name and then choose Edit protocol. Or, from the main
menu, choose
Settings > Edit protocol
and then select the protocol you want
to edit.
Add an investigation protocol
You can add an unlimited number of protocols. Right-click the protocol name
and then choose
Add protocol
.
Or, from the main menu, choose
Settings >
Add investigation protocol
. A new protocol with all investigations will be
created. The new protocol will contain the default values.
Copy an investigation protocol
An entire protocol with all settings can be copied. Right-click the protocol name
and then choose
Copy protocol
. Or, if you are in the protocol, use the
Copy
all
button).
