150
Solar Blue User Manual
Chapter 10
Figure 10.7
Channel settings
Here, you can define the channels to be measured. To enable a channel, the
setting
Off
in the column
Position
, must be set to a position on the screen; for
example, position 1. Click on the channel in the list and change the position in
the lower part of the window. Click
OK
to save the changes and to return to
the
Edit investigation protocol
dialog box.
10.5.2
Biofeedback settings
You can open the
Biofeedback settings
dialog box in different ways.
If you want to save the changes as default protocol settings, do the following:
•
In the
Edit investigation protocol
dialog box, click the
More
button. To
save the changes, click the
OK
button.
If you want to change the settings only for the current patient, do the following:
•
Start the pre-test for the current patient. The
Biofeedback settings
dialog
box will automatically open.
•
During the pre-test or investigation, click the
More
tab and then click the
Edit challenge
button.
•
To save the changes, click the
OK
button.
