Anorectal Manometry
Solar Blue User Manual
125
9.4.13
Remote control buttons
Buttons
Description
Select the previous or next test
Press
Previous
or
Next
to select another anorectal
manometry test.
Change the pressure scale
Press Scale
Up
or
Down
to select another value on the cm
or balloon button.
Zero all pressures during the measurement
Press
Alt
first and then
Zero all
during the measurement to
zero all pressures.
9.4.14
Stop the investigation
To stop the anorectal manometry investigation:
Press the
Stop investigation
button to stop the investigation.
9.5
Analysis
9.5.1
Introduction
Analysis can be performed by inserting channels markers or by using the
channel definition settings. LABORIE recommends using the method with the
channel markers.
9.5.2
Insert channel markers
The channel markers should be inserted on the channels on which the specific
test is registered. The results will then be calculated on these channels.
When
you open the investigation for the first time, the
Anorectal manometry
channel marker settings
dialog box automatically opens (Figure 9.21).
