126
Solar Blue User Manual
Chapter 9
Figure 9.21
Example of anorectal manometry channel marker settings
When you performed the investigation with, for instance, a spiral catheter, you
must decide on which channel(s) you want to perform analysis for each test.
After you set this, you can save the settings as default. For the next
investigation (if performed with the same catheter and in the same way), you
can use these settings again.
When you performed the investigation with a radial catheter, you select all
channels for all tests.
It is always possible to change the settings (after you reviewed the curves and
decide that the settings must be changed). Choose
Settings > Anorectal
manometry channel marker settings
to display the settings dialog.
9.5.3
Channel definition
In the
Channel definitions
dialog box (Figure 9.22), you can define which
pressure channels you want to analyze. Choose
Settings > Channel
definition
or click the
Channel definition
button to open it.
