166
Solar Blue User Manual
Chapter 12
indicated on the software buttons. Clicking the button will have the same effect
as pressing the corresponding button on the remote control.
The main part of the screen shows the plot windows for the selected channels.
Your screen may look different as the result of different protocol settings or
system settings. The name of each channel and the scale of the plot window is
shown next to the plot window. For all channels, the numerical value is shown
in real time during measurement. The names of the channels are shown in the
same color as the corresponding curve. This way different channels are easily
identified if more curves are shown in the same plot window.
During an investigation, the status bar is displayed at the bottom of the screen.
The status bar displays the following information:
•
Memory: Computer memory available to store an investigation.
•
Infused: The volume infused into the patient, in milliliters.
•
Bladder: The volume in the bladder, in milliliters (infused initial
bladder volume
– voided volume).
•
Pull distance: The distance (in cm) over which the catheter must be
withdrawn during urethral pressure profiles.
•
Solar Blue product (PE) number (see also on the back side of the Solar
Blue module). For an explanation of the PE number, see Appendix B.
12.3.3
Button toolbar
Depending on the investigation one or more of the following buttons may be
available:
Buttons
Description
Show Bluetooth quality information.
Start and stop the pump.
Increase the pump speed.
Decrease the pump speed.
Select the proper EMG scale; the size of the EMG graph is
made smaller.
