158
Solar Blue User Manual
Chapter 11
11.2 Stationary Measurement
After selecting the protocol and investigation name (i.e., pressure-flow study)
in the measurement program, the software will search for a registered Luna. If
you have registered more than one Luna, select the Luna module that you
want to use by clicking on it, as shown in Figure 11.1. The LCD display shows
standby
.
Figure 11.1
Select Luna
After a connection between the Luna and the computer had been established,
the LCD display shows
stationary
.
NOTE
You cannot connect a Luna that is recording an
ambulatory investigation. The software shows the
following message: “The Luna is in ambulatory mode.
Start the ambulatory measurement program to finish the
ambulatory investigation”.
During the pretest, a window appears to connect the catheter, as shown in
Figure 11.2.
