168
Solar Blue User Manual
Chapter 12
Buttons
Description
Activate/deactivate tap-water sound.
The sound of running tap water is played. The sound
continues until the button is clicked again.
Run Quality check.
Perform a quality check before starting the investigation. You
can find more information in § 2.6.
12.3.4
Remote control
The urodynamic investigations on the Solar Blue measurement system can be
performed by using the RC-1200 remote control. The Solar Blue module is
standard equipped with an infrared receiver (see § 2.5.4). To operate properly,
point the remote control in the direction of the infrared receiver while pressing
a key on the remote control. Before working with the remote control, make
sure that you remove the plastic insulator.
The RC-1200 contains 26 keys, as shown in Figure 12.4. The functions of the
various keys are explained in the table that follows Figure 12.4. The key
numbers in the table refer to the numbers on the remote-control diagram.
NOTE
Some keys are not applicable for the Solar Blue software
program.
NOTE
The RC-1000 can also be used but is not described in this
manual. You can find information about the keys of the
RC-1000 in the previous version of this manual.
