L-3 Communications Office STE User Manual Download Page 113

Page: 113 / 312

STE User’s Manual

TPA Functions

Rel. 2.6

4-21

Press: Result:

CHANGE

Toggles between ENABLED and DISABLED

SCROLL

For TPA – if set to ENABLED, advances display to REMOTE AUTHENTICATION
menu (Paragraph

4-5.1.3.1

) or if set to DISABLED, advances display to CARD

PRIVILEGES: menu (Paragraph

4-5.1.4

)

For Users (not TPA), advances display to CARD PRIVILEGES: menu (Paragraph

5.1.4

)

BACK

Returns display to TERMINAL CONFIGURATION CONTROL menu (Paragraph

4-5.1

)

Press

CHANGE

to select the desired option: ENABLED or DISABLED.

Press SCROLL to advance the display.

If REMOTE CONTROL is enabled – advances to the REMOTE AUTHENTICATION menu.

If REMOTE CONTROL is disabled – advances to CARD PRIVILEGES menu.

NOTES

1. To place the STE into the Remote Control mode, you must enable either

Remote Authentication or the Access Control List.

2. Enabling Remote Control automatically enables Remote Authentication,

unless you changed its default setting. Press

SCROLL

to verify the setting or

to make changes.

3. If you enable Remote Control, you will be able to make changes in the

TERMINAL CONTROL menu, to set either the Front Panel or the Terminal
Under Host Port Control (remote control) options (Paragraph

5-1.5

4-5.1.3.1 Remote Authentication

The Remote Authentication default setting is enabled (see REMOTE AUTHENTICATION: ENABLED
menu,

Figure 4-34

). Therefore, when Remote Control is enabled, Remote Authentication is also

enabled. The REMOTE AUTHENTICATION: menu can only be reached by the TPA when Remote
Control is enabled and

SCROLL

is pressed in the REMOTE CONTROL: menu (

Figure 4-32

). The

REMOTE AUTHENTICATION: DISABLED (

Figure 4-33

)

and REMOTE AUTHENTICATION” ENABLED

(

Figure 4-34

) are shown below.

Figure 4-33. REMOTE AUTHENTICATION (DISABLED) Menu

Press: Result:

CHANGE

Toggles between ENABLED and DISABLED.

CAUTION: See enabled display.

SCROLL

For TPA – if set to DISABLED, advances display to CARD PRIVILEGES: menu
(Paragraph

4-5.1.4

BACK

Returns display to TERMINAL CONFIGURATION CONTROL menu (Paragraph

4-5.1

Press

CHANGE

to toggle to the enabled menu (

Figure 4-34

Press

SCROLL

to advance the display.

REMOTE AUTHENTICATION: DISABLED

CHANGE

BACK

SCROLL

Summary of Contents for Office STE
























































































































































































































































































































Search results

Summary of Contents for Office STE

Reviews:

Related manuals for Office STE

Brands by name

Popular brands

L-3 Communications Office STE, User Manual

Search results

Summary of Contents for Office STE

Reviews:

Related manuals for Office STE

Brands by name

Popular brands