L-3 Communications Office STE, User Manual

Page: 111 / 312

STE User’s Manual TPA Functions
Rel. 2.6 4-19
Figure 4-29. TERMINAL PRIVILEGES, ASSOCIATION AND SOFTWARE UPDATE MANAGEMENT
Menu
Press: Result:
MODIFY If TPA Card is not inserted, advances display to INSERT TPA CRYPTO CARD menu.
If TPA Card is inserted, advances display to TERMINAL CONFIGURATION
CONTROL menu (
Figure 4-30 ).
VIEW Advances display to TERMINAL CONFIGURATION CONTROL menu (Paragraph 4-
5.1 ) for users.
SCROLL Advances display to TERMINAL AUDIT INFORMATION menu (Paragraph 5-1.1 )
BACK Returns display to TERMINAL MANAGEMENT menu
Press MODIFY .
NOTE
If the TPA Card was not validated, VALIDATING TPA CRYPTO CARD displays for
approximately 30 seconds, and then the display advances to the TERMINAL
CONFIGURATION CONTROL menu.
4-5.1 Terminal Configuration Control
The TERMINAL CONFIGURATION CONTROL menu ( Figure 4-30 ) is comprised of four major
components: Initial Secure Mode, Change TPA Password, Remote Control, and Card Privileges.
Figure 4-30. TERMINAL CONFIGURATION CONTROL Menu
Press: Result:
SELECT Advances display to INITIAL SECURE MODE: menu
(Paragraph
4-5.1.1 ).
SCROLL Advances display to SECURE ACCESS CONTROL SYSTEM menu (Paragraph 4-5.2 ).
BACK Returns display to TERMINAL PRIVILEGES, ASSOCIATION AND SOFTWARE
UPDATE MANAGEMENT menu (Paragraph
4-5 ).
Press SELECT .
4-5.1.1 Initial Secure Mode
The Initial Secure Mode determines whether the STE will automatically initiate a secure call. The process
is started when the STE is taken off-hook. Three modes are available:
•
Traditional: the STE will proceed to a non-secure voice call, unless changed prior to placing
(dialing) the call.
TERMINAL PRIVILEGES, ASSOCIATION
MODIFY BACK VIEW
AND SOFTWARE UPDATE MANAGEMENT
SCROLL
TERMINAL CONFIGURATION CONTROL
SELECT BACK SCROLL